For CNC job shops

Upload the 3D model, send the quote in minutes.

Kordberg reads the STEP file and works out the holes, stock requirement, setup count and deburring time. Add your machine list, material prices and secondary operations, and the quote comes together on one screen.

Request a demo See features

Calculation results are for information only; the final quoting decision is yours.

Kordberg part engineering screen: loaded 3D part, net dimensions and physical properties

In 30 seconds

From model to quote — how it works

Quotes live in spreadsheets

The same formulas are rebuilt for every part; one forgotten line item shows up as a loss in production, not in the quote.

Critical holes are spotted too late

Long, narrow holes, undercut faces and thin walls turn into “we can’t make this” after the quote has gone out.

Scrap and time are guesswork

Stock size, scrap rate and deburring time are typed in as estimates; the margin is quoted without ever being measured.

Hole analysis

See the critical holes before you quote.

As soon as the model loads, holes are grouped and diameter and L/D ratio are calculated. Holes beyond the safe limit are flagged with a red band, so you know at the quoting stage which hole will need which machine.

Smart hole and DFM panel: 3 hole groups, 2 critical

Stock and scrap

Stock requirement and scrap rate, the moment you add allowances.

Enter the machining allowance per axis and the clamping allowance; stock size, gross weight and scrap rate update automatically. The effect of the vise allowance on the part is visible in 3D.

Raw material and stock form: 124 × 84 × 26 mm stock, 51% scrap rate

Deburring and sharp edges

Stop guessing deburring time.

Sharp edges are split into external and internal, total edge length is measured, and your speed assumption gives an estimated deburring time. Chamfer and relief decisions flow into the quote as cost.